No Cement! Dramatic reduction of chair time!
Cementless
Prosthetic System
ECO Abutment
Multiunit Abutment
Two ‘Cementless Prosthetic Systems’ from DIO
Perfectly solves the residual cement problem and dramatically
reduces chair time.
Introducing ECO Abutment, Multiunit Abutment.
Combining Multiunit Abutment or ECO Abutment with a dedicated screw.
It is a true screw-retained prosthetic system that connects directly to the zirconia crown.
ECO Abutment
* Related products may be purchased subject to national or market license. Please contact the local DIO corporation or dealers.
Multiunit Abutment
The direct crown method using ECO abutment is a cementless prosthetic system that directly connects the screw and base abutment to the zirconia prosthesis without using a post.
Conclude the Healing Cap
Remove the Healing Cap
Maintain Base Abutment
Conclude the Scanbody
Remove the Scanbody
Maintain Base Abutment
During the initial procedure, after connecting the base abutment to the fixture, only the upper components such as the healing cap and scanbody are replaced without separating them to prevent bacterial infection due to secondary surgery and to continuously maintain the recovered soft tissue. Also with various base abutment diameters such as ⌀4.2, ⌀4.8, ⌀5.5, and ⌀6.5, it can be used for various cases according to the applied tooth formula, such as anterior and posterior teeth. In particular, it is possible to manufacture prostheses even in cases with a vertical diameter as low as 5mm.
Above all, it is the most economical prosthetic system that can give satisfaction to the operator at a lower material cost than custom abutments and general ready-made abutments.
Direct crown method using Multiunit Abutment is a cementless prosthetic system that solves the residual cement problem by directly fastening zirconia prosthesis to the abutment with a dedicated screw without using a cylinder.
It is a round-type dedicated screw that distributes the stress applied to zirconia prostheses to prevent fractures and cracks to secure stability, and it is possible to produce aesthetic prosthetics by creating screw holes at desired locations with maximum 45° angle compensation.
In addition, if the crown is longer than the adjacent tooth, it is possible to apply gum and Healing Abutment and Temporary. It is possible to reduce material cost by not using a cylinder, so the cost is reasonable compared to custom abutments.
Abutment System comparison
ECO Abutment | Multiunit Abutment | |
---|---|---|
none | Residual Cement | none |
possible | Prevent infection | possible |
Various sizes to choose from | Aesthetic Prosthetics | Up to 45° angle compensation |
5mm lower case also available | Vertical dimension | Minimum 6mm required Gum can be given |
most economical | Cost | Cheaper than custom abutments |